A
-
Aghajani, R.H.
Studying the Effect of Different Ratios of High Density Polyethylene Wax Binder on the Mechanical Strength of Ceramic Cores Made from an Injection Molding Process [Volume 13, Issue 4, 2000]
-
Alaie, J.
Rheological Study of Polyethylene/Polypropylene Blends [Volume 13, Issue 4, 2000]
-
Ali Hosseini, F.
Investigation of Protease Enzyme Effect on Some of the Physical Properties of Woolen Yarn [Volume 13, Issue 3, 2000]
-
Amani, S.
Effect of Difunctional Monomers on the Wear Resistance of Acrylic Teeth [Volume 13, Issue 3, 2000]
-
Amini, H.
Production of a Polymeric Ocular Prosthesis for Glaucoma Production of a Polymeric Ocular Prosthesis for Glaucoma Therapy [Volume 13, Issue 1, 2000]
-
Amirshahi, S.H.
Chemical Modification of Cellulose to Improve Its Transfer Printability [Volume 13, Issue 4, 2000]
-
Ayati, B.
The Effect of Polymers on the Cellulose Wastewater Treatment and Their Comparison with Chemical Coagulants [Volume 13, Issue 1, 2000]
B
-
Bakhshandeh, G.R.
Study on the Adhesion of Cushion Gum to Carcass in Retreaded Tyre [Volume 13, Issue 4, 2000]
-
Banihashemi, A.
Synthesis and Characterization of Several New Poly(benzimidazole-co-urea)s [Volume 13, Issue 2, 2000]
-
Beheshty, M.H.
Determination of Injection Port and Vent Locations of Hollow Tubes by RTM-Experimental and Computer Simulation [Volume 13, Issue 4, 2000]
-
Borhani, S.
Alkaline Hydrolysis of Polyester Fabrics in Alcoholic Sodium Hyroxide Solution [Volume 13, Issue 3, 2000]
E
-
Eslami, Y.
Production of a Polymeric Ocular Prosthesis for Glaucoma Production of a Polymeric Ocular Prosthesis for Glaucoma Therapy [Volume 13, Issue 1, 2000]
F
-
Fasihi Dastjerdy, A.
Determination of Injection Port and Vent Locations of Hollow Tubes by RTM-Experimental and Computer Simulation [Volume 13, Issue 4, 2000]
G
-
Ganjidoust, H.
The Effect of Polymers on the Cellulose Wastewater Treatment and Their Comparison with Chemical Coagulants [Volume 13, Issue 1, 2000]
-
Ghanbar, M.
Chemical Modification of Cellulose to Improve Its Transfer Printability [Volume 13, Issue 4, 2000]
-
Ghasemi, M.
Effect of Simultaneous Boiling off and Bleaching Conditions on the Degree of Whiteness and the Remaining Starch Size on 100% Grey Cotton Fabric [Volume 13, Issue 2, 2000]
-
Ghoreishy, M.H.
Scale-up of Rubber Mixing Using Unit Work Method [Volume 13, Issue 3, 2000]
-
Golshan Ebrahimi, N.
Investigation of the Properties of Produced Blend Fibers from Modified PP with PET [Volume 13, Issue 1, 2000]
-
Golshan Ebrahimi, N.
Producing Dyeable Polypropylene Fibers with Blending PP/PET Blending PP/PET [Volume 13, Issue 2, 2000]
H
-
Haghtalab, A.
Rheological Study of Polyethylene/Polypropylene Blends [Volume 13, Issue 4, 2000]
-
Hassan-Nejad, M.
Investigation of the Properties of Produced Blend Fibers from Modified PP with PET [Volume 13, Issue 1, 2000]
-
Hassan-Nejad, M.
Producing Dyeable Polypropylene Fibers with Blending PP/PET Blending PP/PET [Volume 13, Issue 2, 2000]
-
Hemmati, M.
Rheological Study of Polyethylene/Polypropylene Blends [Volume 13, Issue 4, 2000]
-
Hosseini, S.M.
The Effect of Microwave Radiation on Dyeing of Polyester Fibers [Volume 13, Issue 2, 2000]
J
-
J. Zohoorian-Mehr, M.
Comparative Thermal and Mechanical Study of Aromatic Tackifying Resins [Volume 13, Issue 1, 2000]
-
Jafary, M.R.
Production of a Polymeric Ocular Prosthesis for Glaucoma Production of a Polymeric Ocular Prosthesis for Glaucoma Therapy [Volume 13, Issue 1, 2000]
K
-
Karbasizadeh, M.
Effect of Simultaneous Boiling off and Bleaching Conditions on the Degree of Whiteness and the Remaining Starch Size on 100% Grey Cotton Fabric [Volume 13, Issue 2, 2000]
-
Keyanpour-Rad, M.
Studying the Effect of Different Ratios of High Density Polyethylene Wax Binder on the Mechanical Strength of Ceramic Cores Made from an Injection Molding Process [Volume 13, Issue 4, 2000]
-
Khalili, H.
The Effect of Microwave Radiation on Dyeing of Polyester Fibers [Volume 13, Issue 2, 2000]
-
Kharrat, R.
Effect of DRISPAC Polymer on the Rheological Behaviour of Drilling Mud [Volume 13, Issue 2, 2000]
-
Khonakdar, H.A.
Simulation of the Film Blowing Extrusion Process: An Investigation on Heat Transfer and Deformation [Volume 13, Issue 3, 2000]
-
Koolivand, E.
Synthesis and Characterization of Several New Poly(benzimidazole-co-urea)s [Volume 13, Issue 2, 2000]
M
-
M. Vahdati Mohadess, S.
Evaluation of Kinetics and Activation Parameters of Electrochemical Polymerization of Ortho-Aminophenol [Volume 13, Issue 1, 2000]
-
Mehrabi, H.A.
Studying the Effect of Different Ratios of High Density Polyethylene Wax Binder on the Mechanical Strength of Ceramic Cores Made from an Injection Molding Process [Volume 13, Issue 4, 2000]
-
Mehrabzadeh, M.
Simulation of the Film Blowing Extrusion Process: An Investigation on Heat Transfer and Deformation [Volume 13, Issue 3, 2000]
-
Mehrabzadeh, M.
Study on Physical and Mechanical Properties, Thermal Behaviour and Morphology of Polyacetal and Polyurethane Thermoplastic Elastomer Blends [Volume 13, Issue 3, 2000]
-
Mehrebzadeh, M.
Synthesis of Poly(4,4- Oxibisphenylene pyromellitimide) and Some of Its Monomers [Volume 13, Issue 1, 2000]
-
Mirkhalilzadeh Ershady, F.
Synthesis of Poly(4,4- Oxibisphenylene pyromellitimide) and Some of Its Monomers [Volume 13, Issue 1, 2000]
-
Mirzadeh, H.
Production of a Polymeric Ocular Prosthesis for Glaucoma Production of a Polymeric Ocular Prosthesis for Glaucoma Therapy [Volume 13, Issue 1, 2000]
-
Mojtahedi, M.R.M.
Producing Dyeable Polypropylene Fibers with Blending PP/PET Blending PP/PET [Volume 13, Issue 2, 2000]
-
Morshed, M.
Alkaline Hydrolysis of Polyester Fabrics in Alcoholic Sodium Hyroxide Solution [Volume 13, Issue 3, 2000]
-
Morshedian, J.
Simulation of the Film Blowing Extrusion Process: An Investigation on Heat Transfer and Deformation [Volume 13, Issue 3, 2000]
N
-
Naderi, Gh.
Scale-up of Rubber Mixing Using Unit Work Method [Volume 13, Issue 3, 2000]
-
Nodehi, A.O.
Simulation of the Film Blowing Extrusion Process: An Investigation on Heat Transfer and Deformation [Volume 13, Issue 3, 2000]
O
-
Ogy, J.
Preparation of Polyethylene Glycol with Low Ash Content [Volume 13, Issue 2, 2000]
R
-
Rabiei, A.
Comparative Thermal and Mechanical Study of Aromatic Tackifying Resins [Volume 13, Issue 1, 2000]
-
Rezaee Alam, D.
Study on Physical and Mechanical Properties, Thermal Behaviour and Morphology of Polyacetal and Polyurethane Thermoplastic Elastomer Blends [Volume 13, Issue 3, 2000]
-
Rostami, A.
Evaluation of Kinetics and Activation Parameters of Electrochemical Polymerization of Ortho-Aminophenol [Volume 13, Issue 1, 2000]
S
-
Sadeghi, M.
Effect of Difunctional Monomers on the Wear Resistance of Acrylic Teeth [Volume 13, Issue 3, 2000]
-
Salarieh, M.
Effect of DRISPAC Polymer on the Rheological Behaviour of Drilling Mud [Volume 13, Issue 2, 2000]
-
Soltanalinegad, M.A.
Study on the Adhesion of Cushion Gum to Carcass in Retreaded Tyre [Volume 13, Issue 4, 2000]
T
-
Taghiganji, M.
Synthesis of Poly(4,4- Oxibisphenylene pyromellitimide) and Some of Its Monomers [Volume 13, Issue 1, 2000]
-
Talaghat, M.R.
Preparation of Polyethylene Glycol with Low Ash Content [Volume 13, Issue 2, 2000]
-
Tavanaiee, H.
Effect of Simultaneous Boiling off and Bleaching Conditions on the Degree of Whiteness and the Remaining Starch Size on 100% Grey Cotton Fabric [Volume 13, Issue 2, 2000]
V
-
Vosoughi, M.
The Effect of Polymers on the Cellulose Wastewater Treatment and Their Comparison with Chemical Coagulants [Volume 13, Issue 1, 2000]
Your query does not match with any item